Before getting Sod Junction City KS, a homeowner has to do some preparation. Without the right preparation, mistakes might be made that could hamper the installation. Some of the mistakes might now be known right away. They will only show up in the future when the sod has to be redone. Fortunately, it’s not too difficult for homeowners to do the prep work needed before sod installation. The first thing that needs to be done is measuring the area where the sod will be put down. If the area is large, measuring it may require the assistance of another person.
In order to get the most useful measurement, one must multiply the width by the length in order to get the amount of square feet that has to be covered. This makes it much easier for ordering Sod Junction City KS since most sellers go by square-foot measurements. It’s best to add at least five percent to the square-footage measurement to ensure that there is enough sod to cover the work area. The excess sod can always cut off. Once measurements are taken, the soil must be prepared for the sod. The area where the sod is going should be cleared of all rock and debris.
If the area is by a building’s foundation, it must be made to slope away from the building. This will help to avoid drainage problems in the future. For people who want Sod Junction City KS to give them the best lawn in Kansas, they will have to till the soil to at least a couple of inches of depth. After the soil has been tilled, top soil may be added. The dept of the topsoil should be at least four inches. It’s also a good idea to test the pH level of the soil. Sod installation can be done without soil testing, but people who want professional results should definitely test the soil.
Testing labs often have quick turnaround times, so it won’t hold up installation of Sod Junction City KS. If the lab shows pH discrepancies, they can be corrected by following the recommended course of action. This usually involves adding something to the soil.
