If one of the glass sections in a mutli-paned window is cracked, a homeowner can remove a pane and clean a frame that surrounds it by following the steps below. Afterward, a new pane can be installed to complete a Window Glass Repair in Colorado Springs.
Materials
- gloves
- plastic sheeting
- small hammer
- detergent
- water
- spray bottle
- lint-free sponge or cloth
- putty knife
- glass pane
- tube of glazing compound
- caulk gun
Remove A Cracked Pane And Clean A Frame
A pair of gloves should be put on before handling damaged glass. A piece of plastic sheeting should be draped across the property that is below a windowpane’s exterior. While standing by the interior side of a window, a small hammer can be used to tap a glass pane and break it into small pieces. Shards of glass will fall onto sheeting.
If large shards of glass are stuck in a frame, they can be grasped by their edges to pull them out. After removing glass, soapy water should be sprayed onto a lint-free sponge or cloth. A frame needs to be cleaned thoroughly with soapy water. A putty knife can be used to remove glazing putty from a window’s frame. A clean cloth should be used to dry a frame’s interior.
Install A Glass Pane And Apply Glazing Compound
The tip of a putty knife should be wedged underneath the edge of each metal point that is installed in a window frame to loosen and remove hardware pieces. After purchasing a replacement pane, the edges of glass need to be lined up evenly with a window’s frame. While using one hand to lightly press against a glass pane, a line of glazing compound should be applied around the edges of a frame.
If too much glazing compound is applied to a frame, it can be removed with a cloth. After compound has dried, a hammer can be used to install metal points around a glass pane. Metal points will assist with stabilizing a glass pane. For additional help with Window Glass Repair in Colorado Springs, an individual can visit Website Domain or another glass company’s website.
Follow us on Instagram.
