Having a clogged sink is frustrating. Not only does this keep you from using this plumbing fixture, a clog often emits unpleasant odors. Common culprits of sink clogs are banana peels, coffee grinds, and egg shells. Grease and oil combined with these and similar materials often causes sinks to back up. Since this poses a potential health risk to household occupants, it’s essential to perform a Plumbing Repair in Lubbock promptly.
To start your Plumbing Repair in Lubbock, cover the outlets with a wet towel. Fill the basin so it will cover the rubber cup of the plunger. Apply a small amount of petroleum jelly to the underside of the lips on the rubber cup. Press the plunger to the dry part of the basin and slowly slide it down over the drain opening. Rapidly pump up and down 15 to 20 times. This fast striking motion creates the pressure needed to unclog a drain. On the last strike, quickly lift the plunger up. Water should come up quickly if the blockage was taken care of. If water does not rush in, complete these steps again. Try another tactic when this fails to work.
Use a drain-and-trap auger. This is also known as a plumber’s snake. Insert the wire from this device through the opening of a pop-up stopper or drain. Slowly move the wire into the drain. Turn the handle as you advance the wire by tightening and loosening the thumbscrew alternately. If there is resistance, move the auger wire back and forth while cranking the handle. Retract the wire slowly by moving the handle back and forth. When this fails to unclog the drain, you may need to try more advanced Plumbing Repair in Lubbock or call a plumber.
A sink is a plumbing fixture that experiences a lot of wear and tear. Parts of this fixtures are sturdy but can become damaged if not treated right. Being vigilant of the substances you put down your drain will enable you to minimize the clogs you have to unblock. For help with Plumbing Repair in Lubbock, call a professional you can trust.
Be the first to like.